FAQ
Is this a single-arm air hose reel?
Yes. This is the RA 19-15D-50FT single-arm model with a fixed flat-plate wall mount. It does not include a 180° swivel bracket.
What comes with the reel?
The package includes the retractable air hose reel, hardware pack, 50 ft hose, 5 ft lead hose, and instruction manual.
How does the hose retract?
Pull the hose to the length you need and it locks in place. To retract it, pull the hose out about 100–200 mm and release it while holding the hose. The maximum working pressure is 300 PSI.
Keep a 50 ft air hose organized and ready at a fixed workshop station. The RELHOST RA 19-15D-50FT is a single-arm retractable hybrid air hose reel with a stable flat-plate wall mount, 3/8-inch hose, and 300 PSI maximum working pressure.
Why Choose This Model
- 50 ft of reach: Covers common work areas around a garage, workshop, or compressor station.
- Fixed wall installation: The flat-plate mounting base is designed for a stable wall-mounted setup.
- Retractable hybrid air hose: Pull the hose to the length you need and it locks in place.
- Controlled retraction: Pull the hose out about 100–200 mm and release it while holding the hose.
- Adjustable stop-ball: Set the preferred maximum extension without tools.
- Adjustable roller bracket: Set the roller bracket to the angle or position that best guides the hose.
What’s Included
- Retractable air hose reel
- Hardware pack
- 5 ft lead hose
- Instruction manual
Product Specifications
- Model: RA 19-15D-50FT
- Hose length: 50 ft, plus 5 ft lead hose
- Hose size: 3/8 inch
- Hose type: Retractable hybrid air hose
- Maximum working pressure: 300 PSI
- Mount type: Flat-plate wall mount
- Product dimensions: 13.9 x 6.7 x 16.26 in (35.4 x 17.1 x 41.3 cm)
- Net weight: 21.4 lb (9.7 kg)
- Mounting hole spacing: 5 x 7 in (127 x 177.8 mm)
Mounting
Use the included paper template to mark the mounting holes. The manual shows a 3/8-inch drill bit and four mounting points for the wall installation. Check the wall for electrical wires and plumbing before drilling, and make sure the reel is firmly mounted before pressurizing.
How the Reel Works
Slowly pull the hose to the desired length. It locks automatically when you stop. To retract the hose, pull it out about 100–200 mm and release it while holding the hose. At least 15 inches of hose should be extended before retraction is triggered.
To shorten the working length, allow the hose to retract to the desired position, then pull it out more than 200–400 mm and release it so it can lock at the new length. To adjust the stop-ball, make sure the reel is locked, open the latch, move the stop-ball to the desired position, and re-latch it.
Safety Information
- Do not exceed the 300 PSI maximum working pressure.
- Always hold the hose until it has completely retracted. Never release it during high-speed retraction.
- Never remove the side cover while the hose is under tension.
- Wear eye protection when mounting and using the product.
- Make sure the reel is firmly mounted before pressurizing.
Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.
Recommended for You
- Choosing a selection results in a full page refresh.
