FAQ
Is this a dual-arm air hose reel?
Yes. This is the 50 ft RA-19 dual-arm series. Choose With Bracket for the included 180° mounting bracket, or Without Bracket for a custom mounting setup.
What comes with each configuration?
With Bracket includes the retractable air hose reel, 180° mounting bracket, hardware pack, 5 ft lead hose, and instruction manual. Without Bracket includes the reel, hardware pack, 5 ft lead hose, and instruction manual.
How does the hose retract?
Pull the hose to the length you need and it locks in place. To retract it, pull the hose out about 100–200 mm and release it while holding the hose. The maximum working pressure is 300 PSI.
Reach more of your workspace without dragging an air hose across the floor. The RA-19 50 ft dual-arm retractable air hose reel uses a 3/8-inch rubber air hose, 300 PSI maximum working pressure, and an optional 180° mounting bracket for flexible positioning.
Why Choose This Model
- 50 ft of reach: Covers common work areas around a garage, workshop, or compressor station.
- Dual-arm design: Supports flexible hose positioning around your work area.
- 180° mounting bracket option: The With Bracket configuration includes the bracket for wall mounting. The Without Bracket configuration is intended for an existing or custom mounting setup.
- Rubber air hose: The 3/8-inch hose is rated for a maximum working pressure of 300 PSI.
- Controlled retraction: Pull the hose out about 100–200 mm and release it while holding the hose.
- Adjustable stop-ball: Set the preferred maximum extension without tools.
- Adjustable roller bracket: Set the roller bracket to the angle or position that best guides the hose.
What’s Included
With Bracket
- Retractable air hose reel with 50 ft hose
- 180° mounting bracket
- Hardware pack
- 5 ft lead hose
- Instruction manual
Without Bracket
- Retractable air hose reel with 50 ft hose
- Hardware pack
- 5 ft lead hose
- Instruction manual
Product Specifications
- Hose length: 50 ft, plus 5 ft lead hose
- Hose size: 3/8 inch
- Hose type: Rubber air hose
- Maximum working pressure: 300 PSI
- Working temperature: 23–140°F (-5–60°C)
- With Bracket model: RA19-15DS-RU50FT
- With Bracket dimensions: 13.9 x 6.7 x 18.7 in (35.4 x 17.1 x 47.7 cm)
- With Bracket net weight: 25.1 lb (11.4 kg)
- Mounting hole spacing: 75 x 75 mm (2.95 x 2.95 in) for the mounting bracket
Mounting
The With Bracket configuration includes a 180° mounting bracket for wall mounting. Use the mounting template and a 3/8-inch drill bit as described in the manual. Check the wall for electrical wires and plumbing before drilling, and make sure the reel is firmly mounted before pressurizing.
The Without Bracket configuration includes the reel and hardware pack for an existing or custom mounting setup.
How the Reel Works
Slowly pull the hose to the desired length. It locks automatically when you stop. To retract the hose, pull it out about 100–200 mm and release it while holding the hose. At least 15 inches of hose should be extended before retraction is triggered.
To adjust the stop-ball, make sure the reel is locked, open the latch, move the stop-ball to the desired position, and re-latch it.
Safety Information
- Do not exceed the 300 PSI maximum working pressure.
- Always hold the hose until it has completely retracted. Never release it during high-speed retraction.
- Never remove the side cover while the hose is under tension.
- Wear eye protection when mounting and using the product.
- Make sure the reel is firmly mounted before pressurizing.
Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.
Recommended for You
- Choosing a selection results in a full page refresh.
